Terms of sale

Last updated November 10, 2026.

What you are buying, who sells it, and what we each promise. Plain words. By placing an order you agree to these terms.

Who sells this

TallerFeet sells made-to-size risers for furniture legs. The seller is Curious Union LLC, Ferndale, Michigan. You can reach us at [email protected].

What these risers are and are not for

Please read this section before you order. At checkout you tick a box to say you agree to these terms.

• Made to order, from your sizes. Each riser is made from the sizes you enter. You measure and describe your own furniture. Depending on what you order, your risers are printed by our printing partner, Slant 3D, in the United States, and shipped straight to you, or they are made and shipped by our own workshop. Orders with felt pads, or in a color only the workshop prints, are always made in the workshop. Either way the sizes are yours: nobody checks them against your furniture, and nobody at TallerFeet sees your furniture.
• Guaranteed: the size. The opening (the hole in the top that your leg sits in) and the lift (how much taller it makes the leg) match the sizes shown at checkout, within ±0.5 mm or 1%, whichever is larger. If a riser is outside that, we remake it or refund it. See the size guarantee.
• Not guaranteed: that it fits your furniture. That depends on your measurement, and only you can check it.
• The weight figure is an estimate, not a rating. The builder shows an estimate of the weight each riser can carry. It is not a tested rating, not a certification and not a guarantee. Do not load a riser beyond the estimate shown for it. See the weight estimate.
• Furniture that holds people: count them. If anyone sits or lies on the furniture, such as a bed or a sofa, the weight you enter must include them, at the most the furniture will ever hold. Risers are for ordinary, steady use, not for jumping on or dropping onto.
• Never under anything a person stands or climbs on. No ladders, step stools, bunk beds or cribs.
• Never under or near anything hot. No stoves, ovens, heaters, grills, fireplaces, wood stoves or hot appliances. The plastic softens with heat.
• Indoor use only. Keep risers out of direct sunlight, away from heat, and out of freezing or damp unheated spaces. This matters most for PLA, which softens in warmth that PETG withstands: a sunny window, a radiator, a hot car.
• Raising furniture changes how stable it is. You decide whether your furniture is safe to raise. Check it after you fit the risers. Keep children and pets in mind. Stop using a riser that cracks, leans or changes shape.

Good uses: tables, desks, beds, sofas, cabinets, dressers, shelves, TV stands, nightstands, plant stands, stands for appliances that stay cool, making room for a robot vacuum, and bringing two pieces to the same height.

What you are buying

Each riser is one printed piece of plastic, PETG or PLA as you choose, with an opening in the top for one furniture leg. Risers are sold one at a time. Most furniture needs four.

A leveling riser is a riser with a deeper opening that comes with four loose plates, 1, 2, 4 and 8 mm thick, printed in the same plastic and color as the riser. You drop plates into the opening, under the leg, to raise that leg by up to 15 mm (about 5/8 in) in 1 mm steps. The plates are part of the riser they come with. They are not made to be used by themselves or under anything else. They arrive joined by small tabs as one or two flat cards, for you to snap or snip apart, or as four separate plates.

Felt pads are an extra, where the builder offers them: one self-adhesive felt pad for each riser, cut to the shape of its base and packed with the risers for you to stick on.

You choose the shape, the sizes, the fit, the style, the finish, the material and the color in the builder. The weight estimate depends on the material: the same riser carries less in PLA than in PETG, and the builder shows the figure for the one you chose. Before you pay, the page shows the opening size, the lift, the base size, the weight estimate and the price. That is the part we make.

Printed parts show fine layer lines and small marks from printing, and colors can differ a little from your screen. That is normal and is not a fault.

The size guarantee (limited warranty)

We guarantee two sizes on every riser: the opening and the lift. Each matches the size shown at checkout within ±0.5 mm (about 0.02 in) or 1% of that size, whichever is larger. For example, a lift of 100 mm can measure from 99 to 101 mm.

The opening is the leg size you entered plus the fit you chose. The builder shows it before you pay.

If a riser is outside that, send us a photo with a ruler or calipers across the part within 30 days of delivery, and we remake it or refund it. The refund page says how.

For a leveling riser, the guaranteed lift is the lift with no plates in the opening. The opening is guaranteed in the same way as on any other riser. Each plate’s thickness is guaranteed within ±0.3 mm (about 0.01 in). If a plate is outside that, send us a photo in the same way and we replace the plate. Separating the plates at their tabs does not affect the guarantee.

The guarantee is given by Curious Union LLC to the person who placed the order. It does not cover a riser that has been cut, drilled, glued, heated or changed in any other way, or one that has been used in a way these terms forbid.

Fit is yours to check

You measure the leg and choose the fit, so whether a riser fits your furniture depends on your numbers. Use the measuring guide before you order. Check the opening size on the page against your leg.

If the riser is the size you ordered and it does not fit your leg, that is not a fault in the riser, and we can’t refund or replace it. The refund page explains.

The weight estimate

For each design the builder shows a line such as “Estimated to carry about 45 lb per riser”. That figure is an engineering estimate. We work it out from the leg’s footprint and the strength of the plastic. It is for a steady load pressing straight down, with each riser sitting flat on a firm floor, shared evenly across the risers, at normal room temperature. The figure already has a large safety margin built in, but weight is rarely shared evenly, so for furniture people sit or lie on, stay well under it.

It is not a tested rating, not a certification and not a guarantee. No riser is load-tested before it ships. Do not load a riser beyond the estimate shown for it.

Sideways loads, impacts, dragging furniture while it is on the risers, a riser that does not sit flat on the floor, heat, and sunlight through glass all reduce what a riser can carry.

Before you pay, you enter the total weight the risers will carry: the furniture and everything on it or in it, including anyone who sits or lies on it. We do not take an order where that weight, shared across the risers, is more than the estimate. You are responsible for that weight figure being true and complete.

The estimate applies only to the weight and the number of risers you ordered together. If you add weight later, or put fewer risers under it, the estimate no longer applies.

The size guarantee is still the only guarantee. If a riser cracks or changes shape under a load at or below its estimate, the refund page says what we do about that riser.

Safety and stability

Raised furniture is easier to tip. The taller the riser, the more that matters. Whether a piece of furniture is safe to raise is your decision, because only you can see it.

• Use risers indoors, on a firm, flat floor. On carpet or a rug, press each riser down until it sits flat and check that the furniture is steady. Do not use them on thick or soft carpet that lets a riser lean. A plain riser needs a level floor. A leveling riser is made for a floor that is a little out of level, and its base must still sit flat on the floor.
• Use the same lift on every leg, unless you are leveling on purpose.
• Seat every leg fully in its opening.
• Felt pads let furniture slide more easily on a hard floor. Do not fit them where a piece must not move.
• With a leveling riser, seat the plates flat on the bottom of the opening, under the leg.
• Never stack anything else in or under a riser.
• After you add plates, check that the leg still sits well down in the opening.
• Lift furniture off its risers to move it. Do not drag it.
• Anchor tall furniture, such as dressers, shelves and cabinets, to the wall.
• Keep children and pets in mind. Children climb and pull on furniture.
• Check the furniture after fitting, and again from time to time.
• Stop using a riser that cracks, leans or changes shape.

If you use a riser in a way these terms forbid

If you use a riser under anything a person stands or climbs on, under or near heat, outdoors or in direct sunlight, or with more weight than its estimate, or if you keep using a riser that has cracked, leaned or changed shape, you do so at your own risk. To the extent the law allows, you accept responsibility for any harm or damage that results.

Prices, shipping and tax

Prices are in US dollars and shown before you pay. Shipping is charged once for the whole order, by weight. We ship only to addresses in the United States. Sales tax is added on the payment page where it applies. Stripe works it out from your shipping address.

Paying

You pay by card on Stripe’s own payment page. We never see or keep your card number. Your order is accepted when the payment goes through. You then get an order page with a private link, and we email that link to you.

Changing or cancelling an order

Each riser is made to order, and your order goes to the printer automatically. Printing can start within minutes of paying. So please check your sizes before you pay.

We can change or cancel an order only if printing has not started. Write to [email protected] right away with your order number. If we reach it in time, we cancel it and refund all of it. Once printing has started, the order can’t be changed or cancelled.

Making and shipping

Risers are printed after you order, by Slant 3D or in our own workshop, and shipped from the United States. Your order page shows where the order stands, and the tracking number once it ships.

An order usually ships in 5 to 10 business days, often sooner. That is what usually happens, not a promise: we do not promise a delivery date. If your order has not shipped within 30 days of the day you paid, we email you. You can then wait, or cancel and get a full refund.

If something is wrong

A riser that is the wrong size, badly printed, or lost or damaged on the way to you is remade or refunded. See the refund page.

Limits of our limited warranty

The size guarantee above, and the promises on the refund page about a bad print, shipping damage and a riser that cracks within its weight estimate, are this limited warranty. They are the only promises we make about a riser. We do not promise that a riser fits your furniture, that it suits your use, or that it will carry any particular weight.

Any implied warranty, including the implied warranties of merchantability and fitness for a particular purpose, lasts only 12 months from the day the riser was delivered. Some states do not allow limitations on how long an implied warranty lasts, so this limitation may not apply to you.

We are not responsible for incidental or consequential damages, such as damage to furniture, to floors, or to anything on or near the furniture. Some states do not allow the exclusion or limitation of incidental or consequential damages, so this limitation or exclusion may not apply to you.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Limit of our liability

Our liability for any order is limited to what you paid for it, to the extent the law allows. Nothing in these terms limits liability that the law does not let us limit.

Disputes and governing law

These terms are governed by the laws of the State of Michigan, without regard to its conflict-of-laws rules. If we can’t sort out a problem by email, it is decided in the courts of the State of Michigan, and you and Curious Union LLC agree to those courts. Either of us can still use small-claims court where it applies, and nothing here takes away a right your own state’s consumer law gives you that can’t be waived.

Changes

We may change these terms for future orders. The terms on the page when you order are the ones that apply to your order.